Last updated on 2024-11-23 20:48:22 CET.
| Flavor | Version | Tinstall | Tcheck | Ttotal | Status | Flags |
|---|---|---|---|---|---|---|
| r-devel-linux-x86_64-debian-clang | 1.16.2 | 37.25 | 196.50 | 233.75 | ERROR | |
| r-devel-linux-x86_64-debian-gcc | 1.16.2 | 32.08 | 155.22 | 187.30 | ERROR | |
| r-devel-linux-x86_64-fedora-clang | 1.16.2 | 427.10 | ERROR | |||
| r-devel-linux-x86_64-fedora-gcc | 1.16.2 | 415.48 | ERROR | |||
| r-devel-windows-x86_64 | 1.16.2 | 57.00 | 529.00 | 586.00 | ERROR | |
| r-patched-linux-x86_64 | 1.16.2 | 41.87 | 228.20 | 270.07 | OK | |
| r-release-linux-x86_64 | 1.16.2 | 38.84 | 224.45 | 263.29 | OK | |
| r-release-macos-arm64 | 1.16.2 | 142.00 | NOTE | |||
| r-release-macos-x86_64 | 1.16.2 | 279.00 | NOTE | |||
| r-release-windows-x86_64 | 1.16.2 | 62.00 | 537.00 | 599.00 | OK | |
| r-oldrel-macos-arm64 | 1.16.2 | 136.00 | NOTE | |||
| r-oldrel-macos-x86_64 | 1.16.2 | 247.00 | NOTE | |||
| r-oldrel-windows-x86_64 | 1.16.2 | 60.00 | 700.00 | 760.00 | OK |
Version: 1.16.2
Check: compiled code
Result: NOTE
File ‘data.table/libs/data_table.so’:
Found non-API calls to R: ‘LEVELS’, ‘SETLENGTH’, ‘SET_GROWABLE_BIT’,
‘SET_TRUELENGTH’, ‘STRING_PTR’, ‘TRUELENGTH’
Compiled code should not call non-API entry points in R.
See ‘Writing portable packages’ in the ‘Writing R Extensions’ manual,
and section ‘Moving into C API compliance’ for issues with the use of
non-API entry points.
Flavors: r-devel-linux-x86_64-debian-clang, r-devel-linux-x86_64-debian-gcc, r-devel-linux-x86_64-fedora-clang, r-devel-linux-x86_64-fedora-gcc
Version: 1.16.2
Check: tests
Result: ERROR
Running ‘S4.R’ [1s/1s]
Running ‘autoprint.R’ [0s/1s]
Comparing ‘autoprint.Rout’ to ‘autoprint.Rout.save’ ... OK
Running ‘froll.R’ [23s/32s]
Running ‘knitr.R’ [1s/1s]
Comparing ‘knitr.Rout’ to ‘knitr.Rout.save’ ... OK
Running ‘main.R’ [51s/63s]
Running ‘nafill.R’ [1s/1s]
Running ‘other.R’ [0s/0s]
Running ‘programming.R’ [1s/1s]
Running ‘types.R’ [0s/1s]
Running the tests in ‘tests/main.R’ failed.
Complete output:
> require(data.table)
Loading required package: data.table
>
> test.data.table() # runs the main test suite of 5,000+ tests in /inst/tests/tests.Rraw
getDTthreads(verbose=TRUE):
This installation of data.table has not been compiled with OpenMP support.
omp_get_num_procs() 1
R_DATATABLE_NUM_PROCS_PERCENT unset (default 50)
R_DATATABLE_NUM_THREADS unset
R_DATATABLE_THROTTLE unset (default 1024)
omp_get_thread_limit() 1
omp_get_max_threads() 1
OMP_THREAD_LIMIT 3
OMP_NUM_THREADS 3
RestoreAfterFork true
data.table is using 1 threads with throttle==1024. See ?setDTthreads.
test.data.table() running: /home/hornik/tmp/R.check/r-devel-clang/Work/build/Packages/data.table/tests/tests.Rraw.bz2
Error in bmerge(i, x, leftcols, rightcols, roll, rollends, nomatch, mult, :
typeof x.START_DATE (integer) != typeof i.DATE (double)
Thu Nov 21 21:47:57 2024 endian==little, sizeof(long double)==16, longdouble.digits==64, sizeof(pointer)==8, TZ==unset, Sys.timezone()=='Europe/Vienna', Sys.getlocale()=='LC_CTYPE=C.UTF-8;LC_NUMERIC=C;LC_TIME=C.UTF-8;LC_COLLATE=C;LC_MONETARY=C.UTF-8;LC_MESSAGES=C.UTF-8;LC_PAPER=C.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=C.UTF-8;LC_IDENTIFICATION=C', l10n_info()=='MBCS=TRUE; UTF-8=TRUE; Latin-1=FALSE; codeset=UTF-8', getDTthreads()=='This installation of data.table has not been compiled with OpenMP support.; omp_get_num_procs()==1; R_DATATABLE_NUM_PROCS_PERCENT==unset (default 50); R_DATATABLE_NUM_THREADS==unset; R_DATATABLE_THROTTLE==unset (default 1024); omp_get_thread_limit()==1; omp_get_max_threads()==1; OMP_THREAD_LIMIT==3; OMP_NUM_THREADS==3; RestoreAfterFork==true; data.table is using 1 threads with throttle==1024. See ?setDTthreads.', .libPaths()=='/home/hornik/tmp/scratch/RtmpB8GVJq/RLIBS_3795f334d5ed70','/home/hornik/tmp/R.check/r-devel-clang/Work/build/library', zlibVersion()==1.3.1 ZLIB_VERSION==1.3.1
Error in test.data.table() :
Failed in 00:01:02 elapsed (50.7s cpu) after test 1847.3 before the next test() call in /home/hornik/tmp/R.check/r-devel-clang/Work/build/Packages/data.table/tests/tests.Rraw.bz2
Calls: test.data.table -> stopf -> raise_condition -> signal
Execution halted
Flavor: r-devel-linux-x86_64-debian-clang
Version: 1.16.2
Check: tests
Result: ERROR
Running ‘S4.R’ [0s/1s]
Running ‘autoprint.R’ [0s/0s]
Comparing ‘autoprint.Rout’ to ‘autoprint.Rout.save’ ... OK
Running ‘froll.R’ [14s/16s]
Running ‘knitr.R’ [0s/0s]
Comparing ‘knitr.Rout’ to ‘knitr.Rout.save’ ... OK
Running ‘main.R’ [53s/50s]
Running ‘nafill.R’ [1s/1s]
Running ‘other.R’ [0s/0s]
Running ‘programming.R’ [1s/1s]
Running ‘types.R’ [0s/1s]
Running the tests in ‘tests/main.R’ failed.
Complete output:
> require(data.table)
Loading required package: data.table
>
> test.data.table() # runs the main test suite of 5,000+ tests in /inst/tests/tests.Rraw
getDTthreads(verbose=TRUE):
OpenMP version (_OPENMP) 201511
omp_get_num_procs() 64
R_DATATABLE_NUM_PROCS_PERCENT unset (default 50)
R_DATATABLE_NUM_THREADS unset
R_DATATABLE_THROTTLE unset (default 1024)
omp_get_thread_limit() 3
omp_get_max_threads() 3
OMP_THREAD_LIMIT 3
OMP_NUM_THREADS 3
RestoreAfterFork true
data.table is using 3 threads with throttle==1024. See ?setDTthreads.
test.data.table() running: /home/hornik/tmp/R.check/r-devel-gcc/Work/build/Packages/data.table/tests/tests.Rraw.bz2
Error in bmerge(i, x, leftcols, rightcols, roll, rollends, nomatch, mult, :
typeof x.START_DATE (integer) != typeof i.DATE (double)
Sat Nov 23 14:59:26 2024 endian==little, sizeof(long double)==16, longdouble.digits==64, sizeof(pointer)==8, TZ==unset, Sys.timezone()=='Europe/Vienna', Sys.getlocale()=='LC_CTYPE=C.UTF-8;LC_NUMERIC=C;LC_TIME=C.UTF-8;LC_COLLATE=C;LC_MONETARY=C.UTF-8;LC_MESSAGES=C.UTF-8;LC_PAPER=C.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=C.UTF-8;LC_IDENTIFICATION=C', l10n_info()=='MBCS=TRUE; UTF-8=TRUE; Latin-1=FALSE; codeset=UTF-8', getDTthreads()=='OpenMP version (_OPENMP)==201511; omp_get_num_procs()==64; R_DATATABLE_NUM_PROCS_PERCENT==unset (default 50); R_DATATABLE_NUM_THREADS==unset; R_DATATABLE_THROTTLE==unset (default 1024); omp_get_thread_limit()==3; omp_get_max_threads()==3; OMP_THREAD_LIMIT==3; OMP_NUM_THREADS==3; RestoreAfterFork==true; data.table is using 3 threads with throttle==1024. See ?setDTthreads.', .libPaths()=='/tmp/RtmpvWUDqx/RLIBS_179de726929516','/home/hornik/tmp/R.check/r-devel-gcc/Work/build/library', zlibVersion()==1.3.1 ZLIB_VERSION==1.3.1
Error in test.data.table() :
Failed in 49.2s elapsed (52.1s cpu) after test 1847.3 before the next test() call in /home/hornik/tmp/R.check/r-devel-gcc/Work/build/Packages/data.table/tests/tests.Rraw.bz2
Calls: test.data.table -> stopf -> raise_condition -> signal
Execution halted
Flavor: r-devel-linux-x86_64-debian-gcc
Version: 1.16.2
Check: tests
Result: ERROR
Running ‘S4.R’
Running ‘autoprint.R’
Comparing ‘autoprint.Rout’ to ‘autoprint.Rout.save’ ... OK
Running ‘froll.R’ [52s/76s]
Running ‘knitr.R’
Comparing ‘knitr.Rout’ to ‘knitr.Rout.save’ ... OK
Running ‘main.R’ [104s/180s]
Running ‘nafill.R’
Running ‘other.R’
Running ‘programming.R’
Running ‘types.R’
Running the tests in ‘tests/main.R’ failed.
Complete output:
> require(data.table)
Loading required package: data.table
>
> test.data.table() # runs the main test suite of 5,000+ tests in /inst/tests/tests.Rraw
getDTthreads(verbose=TRUE):
OpenMP version (_OPENMP) 202011
omp_get_num_procs() 24
R_DATATABLE_NUM_PROCS_PERCENT unset (default 50)
R_DATATABLE_NUM_THREADS unset
R_DATATABLE_THROTTLE unset (default 1024)
omp_get_thread_limit() 2
omp_get_max_threads() 24
OMP_THREAD_LIMIT 2
OMP_NUM_THREADS unset
RestoreAfterFork true
data.table is using 2 threads with throttle==1024. See ?setDTthreads.
test.data.table() running: /data/gannet/ripley/R/packages/tests-clang/data.table.Rcheck/data.table/tests/tests.Rraw.bz2
Error in bmerge(i, x, leftcols, rightcols, roll, rollends, nomatch, mult, :
typeof x.START_DATE (integer) != typeof i.DATE (double)
Mon Nov 11 07:46:58 2024 endian==little, sizeof(long double)==16, longdouble.digits==64, sizeof(pointer)==8, TZ==unset, Sys.timezone()=='Europe/London', Sys.getlocale()=='LC_CTYPE=en_GB.utf8;LC_NUMERIC=C;LC_TIME=en_GB.UTF-8;LC_COLLATE=C;LC_MONETARY=en_GB.UTF-8;LC_MESSAGES=en_GB.UTF-8;LC_PAPER=en_GB.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_GB.UTF-8;LC_IDENTIFICATION=C', l10n_info()=='MBCS=TRUE; UTF-8=TRUE; Latin-1=FALSE; codeset=UTF-8', getDTthreads()=='OpenMP version (_OPENMP)==202011; omp_get_num_procs()==24; R_DATATABLE_NUM_PROCS_PERCENT==unset (default 50); R_DATATABLE_NUM_THREADS==unset; R_DATATABLE_THROTTLE==unset (default 1024); omp_get_thread_limit()==2; omp_get_max_threads()==24; OMP_THREAD_LIMIT==2; OMP_NUM_THREADS==unset; RestoreAfterFork==true; data.table is using 2 threads with throttle==1024. See ?setDTthreads.', .libPaths()=='/tmp/RtmpOnVx9K/RLIBS_3bf6321684e1c8','/data/gannet/ripley/R/R-clang/library', zlibVersion()==1.2.11 ZLIB_VERSION==1.2.11
Error in test.data.table() :
Failed in 00:02:58 elapsed (00:01:40 cpu) after test 1847.3 before the next test() call in /data/gannet/ripley/R/packages/tests-clang/data.table.Rcheck/data.table/tests/tests.Rraw.bz2
Calls: test.data.table -> stopf -> raise_condition -> signal
Execution halted
Flavor: r-devel-linux-x86_64-fedora-clang
Version: 1.16.2
Check: tests
Result: ERROR
Running ‘S4.R’
Running ‘autoprint.R’
Comparing ‘autoprint.Rout’ to ‘autoprint.Rout.save’ ... OK
Running ‘froll.R’ [39s/48s]
Running ‘knitr.R’
Comparing ‘knitr.Rout’ to ‘knitr.Rout.save’ ... OK
Running ‘main.R’ [87s/100s]
Running ‘nafill.R’
Running ‘other.R’
Running ‘programming.R’
Running ‘types.R’
Running the tests in ‘tests/main.R’ failed.
Complete output:
> require(data.table)
Loading required package: data.table
>
> test.data.table() # runs the main test suite of 5,000+ tests in /inst/tests/tests.Rraw
getDTthreads(verbose=TRUE):
OpenMP version (_OPENMP) 201511
omp_get_num_procs() 24
R_DATATABLE_NUM_PROCS_PERCENT unset (default 50)
R_DATATABLE_NUM_THREADS unset
R_DATATABLE_THROTTLE unset (default 1024)
omp_get_thread_limit() 2
omp_get_max_threads() 24
OMP_THREAD_LIMIT 2
OMP_NUM_THREADS unset
RestoreAfterFork true
data.table is using 2 threads with throttle==1024. See ?setDTthreads.
test.data.table() running: /data/gannet/ripley/R/packages/tests-devel/data.table.Rcheck/data.table/tests/tests.Rraw.bz2
Error in bmerge(i, x, leftcols, rightcols, roll, rollends, nomatch, mult, :
typeof x.START_DATE (integer) != typeof i.DATE (double)
Sat Nov 16 23:25:43 2024 endian==little, sizeof(long double)==16, longdouble.digits==64, sizeof(pointer)==8, TZ==unset, Sys.timezone()=='Europe/London', Sys.getlocale()=='LC_CTYPE=en_GB.utf8;LC_NUMERIC=C;LC_TIME=en_GB.UTF-8;LC_COLLATE=C;LC_MONETARY=en_GB.UTF-8;LC_MESSAGES=en_GB.UTF-8;LC_PAPER=en_GB.UTF-8;LC_NAME=C;LC_ADDRESS=C;LC_TELEPHONE=C;LC_MEASUREMENT=en_GB.UTF-8;LC_IDENTIFICATION=C', l10n_info()=='MBCS=TRUE; UTF-8=TRUE; Latin-1=FALSE; codeset=UTF-8', getDTthreads()=='OpenMP version (_OPENMP)==201511; omp_get_num_procs()==24; R_DATATABLE_NUM_PROCS_PERCENT==unset (default 50); R_DATATABLE_NUM_THREADS==unset; R_DATATABLE_THROTTLE==unset (default 1024); omp_get_thread_limit()==2; omp_get_max_threads()==24; OMP_THREAD_LIMIT==2; OMP_NUM_THREADS==unset; RestoreAfterFork==true; data.table is using 2 threads with throttle==1024. See ?setDTthreads.', .libPaths()=='/data/gannet/ripley/R/packages/tests-devel/data.table.Rcheck','/data/gannet/ripley/R/test-dev','/data/gannet/ripley/R/test-BioCdata','/data/gannet/ripley/R/R-devel/library', zlibVersion()==1.2.11 ZLIB_VERSION==1.2.11
Error in test.data.table() :
Failed in 00:01:38 elapsed (00:01:25 cpu) after test 1847.3 before the next test() call in /data/gannet/ripley/R/packages/tests-devel/data.table.Rcheck/data.table/tests/tests.Rraw.bz2
Calls: test.data.table -> stopf -> raise_condition -> signal
Execution halted
Flavor: r-devel-linux-x86_64-fedora-gcc
Version: 1.16.2
Check: compiled code
Result: NOTE
File 'data.table/libs/x64/data_table.dll':
Found non-API calls to R: 'LEVELS', 'SETLENGTH', 'SET_GROWABLE_BIT',
'SET_TRUELENGTH', 'STRING_PTR', 'TRUELENGTH'
Compiled code should not call non-API entry points in R.
See 'Writing portable packages' in the 'Writing R Extensions' manual,
and section 'Moving into C API compliance' for issues with the use of
non-API entry points.
Flavor: r-devel-windows-x86_64
Version: 1.16.2
Check: tests
Result: ERROR
Running 'S4.R' [1s]
Running 'autoprint.R' [0s]
Comparing 'autoprint.Rout' to 'autoprint.Rout.save' ... OK
Running 'froll.R' [19s]
Running 'knitr.R' [0s]
Comparing 'knitr.Rout' to 'knitr.Rout.save' ... OK
Running 'main.R' [353s]
Running 'nafill.R' [1s]
Running 'other.R' [0s]
Running 'programming.R' [1s]
Running 'types.R' [0s]
Running the tests in 'tests/main.R' failed.
Complete output:
> require(data.table)
Loading required package: data.table
>
> test.data.table() # runs the main test suite of 5,000+ tests in /inst/tests/tests.Rraw
getDTthreads(verbose=TRUE):
OpenMP version (_OPENMP) 201511
omp_get_num_procs() 48
R_DATATABLE_NUM_PROCS_PERCENT unset (default 50)
R_DATATABLE_NUM_THREADS unset
R_DATATABLE_THROTTLE unset (default 1024)
omp_get_thread_limit() 2
omp_get_max_threads() 48
OMP_THREAD_LIMIT 2
OMP_NUM_THREADS unset
RestoreAfterFork true
data.table is using 2 threads with throttle==1024. See ?setDTthreads.
test.data.table() running: D:/RCompile/CRANpkg/lib/4.5/data.table/tests/tests.Rraw.bz2
Error in bmerge(i, x, leftcols, rightcols, roll, rollends, nomatch, mult, :
typeof x.START_DATE (integer) != typeof i.DATE (double)
Thu Nov 21 08:22:07 2024 endian==little, sizeof(long double)==16, longdouble.digits==64, sizeof(pointer)==8, TZ==unset, Sys.timezone()=='Europe/Berlin', Sys.getlocale()=='LC_COLLATE=C;LC_CTYPE=German_Germany.utf8;LC_MONETARY=C;LC_NUMERIC=C;LC_TIME=C', l10n_info()=='MBCS=TRUE; UTF-8=TRUE; Latin-1=FALSE; codepage=65001; system.codepage=65001', getDTthreads()=='OpenMP version (_OPENMP)==201511; omp_get_num_procs()==48; R_DATATABLE_NUM_PROCS_PERCENT==unset (default 50); R_DATATABLE_NUM_THREADS==unset; R_DATATABLE_THROTTLE==unset (default 1024); omp_get_thread_limit()==2; omp_get_max_threads()==48; OMP_THREAD_LIMIT==2; OMP_NUM_THREADS==unset; RestoreAfterFork==true; data.table is using 2 threads with throttle==1024. See ?setDTthreads.', .libPaths()=='D:/temp/2024_11_21_01_50_00_28815/RtmpGIva0G/RLIBS_17ab016731d06','D:/RCompile/recent/R/library', zlibVersion()==1.3.1 ZLIB_VERSION==1.3.1
Error in test.data.table() :
Failed in 00:05:52 elapsed (00:01:11 cpu) after test 1847.3 before the next test() call in D:/RCompile/CRANpkg/lib/4.5/data.table/tests/tests.Rraw.bz2
Calls: test.data.table -> stopf -> raise_condition -> signal
Execution halted
Flavor: r-devel-windows-x86_64
Version: 1.16.2
Check: installed package size
Result: NOTE
installed size is 5.6Mb
sub-directories of 1Mb or more:
libs 1.8Mb
Flavors: r-release-macos-arm64, r-release-macos-x86_64, r-oldrel-macos-arm64, r-oldrel-macos-x86_64